Hruodolf ma pravdu. Su tam dve rozdielne prevodovky.
A co sa tyka toho staleho prevodoveho pomeru tak tu je to nazorne vysvetlene. Len je to v anglictine.
Final drive - calculating speed from gearbox ratios. It's important to note that in almost all vehicles there is also a final reduction gear. This is also called a final drive or a rear- or front-axle gear reduction and it's done in the differential with a small pinion gear and a large ring gear (see the section on differentials lower down the page). In the Subaru example above, it is 4.444:1. This is the final reduction from the output shaft of the gearbox to the driveshafts coming out of the differential to the wheels. So using the example above, in 5th gear, at 3000rpm, the gearbox output shaft spins at 4065rpm. This goes through a 4.444:1 reduction in the differential to give a wheel driveshaft rotation of 914rpm. For a Subaru, assume a wheel and tyre combo of 205/55R16 giving a circumference of 1.985m or 6.512ft. Each minute, the wheel spins 914 times meaning it moves the car (914 x 6.512ft) = 5951ft along the ground, or 1.127 miles. In an hour, that's (60minutes x 1.127miles) = 67.62. In other words, knowing the gearbox ratios and tyre sizes, you can figure out that at 3000rpm, this car will be doing 67mph in 5th gear.
Myslim ze je to velmi vystizne napisane.